Catching up – part two

There were a couple of other items I completed in 2017.  The first item I mentioned in the last post – a top that I wore during the holidays.  This was the 4th version I made from this pattern.  The pattern is a download from Lekala Patterns.    I made  pattern number 4284.  Here is a picture of it.

Lekala 4284

This is a knits-only pattern and is definitely a “business in the front, party in the back” top.  You can create a bow effect with the back yoke.  I have made 2 versions like that, and 2 versions with the back closed up.

You can order ‘made to measure’ patterns from Lekala.  You enter your measurements on the site and you can also add optional measurements or body type items (high bust, narrow shoulders, etc) to get a better fit.  It takes a couple of trials so they do offer a few free patterns.  You can do a test with the free one; it helps you to know how the software calculates.  I have gotten a pretty good fit from these.  The only caveat is ease.  Their patterns don’t have a lot of ease, and their knit patterns have negative ease (meaning the pattern will be smaller than your measurements).  I have increased my tummy and hip measurement to get more ease there.

The reason I like this pattern is because of the set-in sleeve.  Most patterns for knits with a front yoke have a cut-on or dolman sleeve.  I have tried that look and I don’t like it on me.  A set-in sleeve is a much better look for me.

My latest version was made with a sequin fabric for the front and back yokes, and sleeves.  I used a lighter weight ponte for the lower front and back.

P1010929

Back of top, with the yoke attached to the lower back.

P1020010

Lekala sparkly top

My first version was from a denim knit and a navy cotton knit fabric.  (Sorry for the wrinkles; the top was in summer storage and I brought it out for these photos).  The front:

P1020007

The back

P1020006

My second was a ‘winter version’.  I used a sweater knit remnant given to me by a friend for the yokes.  I used a ponte knit for the lower front, back and sleeves.  The back is not ‘open’ since this a cooler weather version.  Not sure why the color is off – the lower front, back and sleeves are a caramel color.

P1020008

P1020009

My third version has the open back and I used a poly spandex knit (with glued-on sequins) I picked up at a sewing retreat for the front and back yokes, and sleeves.  I used the black ponte for the lower front and back.

P1020003

P1020005

(I know…black is not my color).

These tops are pretty easy and once you have made one, they can be made up quickly.

Second Catch-up Item:

When I was at the Mulberry Silks retreat with Sandra Betzina, I did a muslin for Vogue 1385.

V1385

Line Drawing:

V1385 Line Drawing

I had a couple of reasons for making this. I like the neckline and I wanted to test out the raglan sleeve.  I have had good luck with Today’s Fit patterns so was hoping the raglan would work and it did.  Adjustments were minimal.  Normal round back adjustment and that was it.  This is a comfortable shirt.  I tested it with a quilting cotton so this is definitely a wearable muslin. I did wash the fabric in advance and it is very soft and comfortable.  I plan to make at least one more of these.  Then I might try to figure out how to use the raglan feature but change the neckline.  But that won’t be for a while I’m sure.

P1010998 (2)

Lastly, we went to a New Year’s Eve neighborhood party.  I love making dessert and when I saw these on line, I had to have them.

P1010933

Candy cups you can fill with stuff, that are wearing tuxedos!  How cute is that?  So here is what I made.

P1010930

I made red velvet mousse and cheesecake mousse.  I used a pastry bag with tip and piped in the red velvet mousse first, then topped it with the cheesecake mousse and some graham cracker crumbs.  Everyone loved them and I had fun making them.

P1010931

This is the last of the 2017 items.

 

 

 

Catching up

I have a few things I made last year but never blogged.  So this will be a catch-up post and hopefully I will stay on track better this year.  Warning – this is a bit long so grab a snack and enjoy!

One task that took up my sewing time throughout last year was making glitter vests for a group of senior dancers.  The group is called “Encore Dancers” and a friend is in the group.  The group dances at assisted living locations in the area and they have a different theme every month.  Therefore they need multiple vests.  The leader of the group made “one size fits nobody” vests for everyone sometime ago.  The vest my friend showed me was not lined, pretty tired and falling apart.  So my friend asked if I would make her a new vest.  A new vest for her led to multiple vests for her and 5 of the dancers.  Now they each have their own pattern and I can make one of those vests in my sleep.  Here is a sample of the “March” green.  It reverses to silver.  They wear white button-down cotton blouses under the vests, with jeans or black pants, depending on the month.

Dancing Ladies Vest

I enjoyed doing the vests for them, and watched one of their performances.  The leader is 81 and moves like someone half her age.  The rest are mostly in their 70’s.  They are a great inspiration to stay healthy and keep moving!

_______________________________________________________________________________________________

My Talbots Knock-off using Vogue 1451.

When I do buy RTW, generally I shop at Talbots.  I wait for sales, can find items that fit and their clothes last.  Their pants fit me well and are comfortable (unlike almost all the pant patterns I have tried).  I saw this shirt, was not willing to pay full price nor wait for it to be on sale.  The fabric was a little thin for my taste and the fabric I had was a nice cotton.  Of course I wanted to play with embroidery on clothing.  Here is the top I wanted to knock off.

Talbots catalog

I had the blue striped seersucker in my resource center from Hancock’s (remember them?).  I was looking at my patterns and this one from Sandra Betzina was fairly new.

Pattern

I decided to make the shirt, with sleeves and without the banded bottom.  On my version, I used a chambray for the contrast.  I made a few other changes as well.  My version:

V1541 full

I shortened the shirt a few inches, and shortened the front placket about 6 inches.  I thought the placement of the end of the placket was ‘odd’ on the pattern envelope.  And on me, it would end up in an awkward spot.  I also gathered the sleeves like the Talbots version.  One note:  The neckline in the pattern picture is misleading.  It looks like an open Vee, but in fact it is not.  I would like to make this again, but will make a few more changes.  I will shorten it even more, and removed some of the volume in the hips.  Also will open the neckline a bit, more like the pattern photo looks like it should be.  (That is why we sew, right?).

And for the embroidery; I spent a lot of time looking on line and through my library of designs for something similar to the inspiration picture. I didn’t necessarily want a design inside a box like the inspiration, but needed one that was a bit rectangular.  So, I made a muslin of the shirt, and on that muslin tried out the embroidery design.  It is actually two designs combined from the Amazing Designs embroidery disk called Sweetheart Scrolls.

Emb design

I did put a design on both sides of the muslin and it just seemed like too much.  So I chose to only embroider one side.  Besides, if you do both sides they have to match exactly!  More stress!

A close-up of the embroidery:

V1541 Close

Next up:  A scarf for the ASG Annual meeting challenge.  The challenge was to take 1 yd of white cotton fabric and make something.  You could do anything to the fabric that you wanted, but could not add any other fabric to it.  Trims, embellishments, dyeing, embroidery, beads, etc were all OK.  Since there is no way I can get an entire garment out of 1 yard of fabric, I decided to make a scarf.  This is the “Spiral Scarf” from the Sewing with Nancy Sensational Scarves booklet by Nancy Zieman.  I have made a few of these scarves; they are good for me because I have a short neck and scarves with a lot of fabric are not good for me.  This is basically a straight grain piece of fabric sewn into a spiral.  I often take a RTW scarf and cut it up to make a couple of scarves just to reduce the amount of fabric that would end up around my neck.

Image of the book.

Spiral Scarf 09_2018

I dyed the white fabric & cut the strip for the scarf (there is a formula in the book depending on the length you want your scarf).  My first experience with dyeing fabric.  Then used fabric paint and a flower & leaf stencil to add the painted designs.  The final touch was a few embroidered leaves using variegated thread.  I didn’t win a prize, but enjoyed the process.  The cotton fabric makes this scarf a little stiff – lighter weight and fabrics with drape are better for the spiral scarf, but it is wearable in a color that suits me.

Stenciled scarf 1

A close-up of the stencil and embroidered leaf.  The seams of the scarf that make the spiral are less noticeable in a soft print fabric.

Stenciled scarf 2

On the Home Dec front, there were a few things going on as well.  Most of my house is decorated in a pretty neutral manner.  Lots of earth tones, few bright colors.  I accessorize with color in holiday/seasonal decorating.  I feel that the powder room (guest bathroom) is a place to be a little wild with the decorating.  You don’t spend a lot of time in there generally and it gives you something to look at when you are in there.  So, in my powder room I have a black, white and red décor, with zebra wall paper on all 4 walls.  I wanted some sort of art piece on the wall that grabs your eye when you walk in.  I couldn’t find anything I liked and I don’t have the time nor patience to go 100 places to find the right thing.

Enter my sewing skills.  I made a wall-hanging in a crazy quilt pattern using fabrics in guess what?  Black, red and white, along with gold because I always need some bling!  In my embarrassingly large Craftsy class library I have Crazy Quilts with Allie Aller.  I used the simple straight edges pattern for the blocks.  After I put them together, I added some embroidery of roses in the corners.  After that I was paralyzed.  I didn’t want it to have stitching in every seam like more vintage crazy quilts.  I wanted to keep it simple.  I agonized over it for a year; then finally just decided to do a little stitching, add some bling and call it done.  (During 2017 I was trying to finish UFOs and not create new ones). I bought a plan black frame, put it together and hung it on the wall.

View from the doorway.

P1010855

P1010853

Close-up of 1 block.

P1010854

That’s it for now.  I have a few more items, but I have to gather the photos and info so that will be another post.

 

 

Vogue 1540

Still catching up on blogging items previously made.  Earlier this year I made Vogue 1540.  Another Sandra Betzina Vogue pattern.  This one was quite easy.  I did not make any changes, other than my usual size at the shoulders, then gradually moving 1 size larger at bust and hips.  I made the shorter version.

Pattern photo and line drawing:

V1540 line drawing

I used a burgundy wool double knit and a floral print acrylic sweater knit  from my resource center.  I did not add any piping as mentioned in the pattern and did not add pockets.

On me, worn with a brown t-shirt and brown ponte skinny pants (both purchased).  Picture was take in the early spring.

Vogue 1540

My critique:  When I first put this one, it felt like I was wearing a bathrobe.  That isn’t all bad because it is comfortable.  However, I wasn’t sure if it looked like I was wearing a bathrobe.  It is a new style for me and takes getting used to.

Will I make this again?  Yes.  Will I make changes?  Yes.  I plan to take about 4 inches off the length in front, tapering to 0 at the side seam.  I may not do the sleeve insert in the next one either – that will depend on fabric.  I may also make the smaller size in the whole garment to remove some of the volume.  That will also depend on fabric choice.

 

Twist Front Top – V1477

Continuing on with my Vogue Today’s Fit items, I recently completed two versions of Sandra’s twist front top.

V1477_04

V1477

When I was at the retreat, I asked for Sandra’s advice.  I knew the top would be too low-cut for me in the bust area, based on experience with other patterns such as Burda.  I am a little short between shoulder and underarm.  I was glad that Sandra showed me where to shorten the pattern, as the front is oddly shaped.  Below is a picture of the front pattern piece.  Her suggestion was to write “side” and “shoulder” on the pattern piece.  The arrow on the left (pointing up) is the side and the arrow on the right (pointing to the right) is the shoulder.  The right side of the pattern piece with the gentle curve is the center front.

V1477 Pattern

Next picture is a close-up of the shoulder.  A tuck was taken in the pattern at 2 spots below the shoulder in order to shorten the neckline.  Each tuck is about 1/2″ at the neck/center front edge and goes to nothing at the armhole (left side of the picture).  Since I needed a 1″ reduction in the length of the front, Sandra removed 1/2″ from two places.

V1477 Pattern_shoulder

Here is a picture of the pattern piece on a dress form to better illustrate the tucks.

V1477 Shoulder on form

The first top was made from a rayon/spandex blend fabric from FabricMart.  This is a wearable muslin.  I wanted to be sure it would not be too low in front, and that it fit.  It fits and is very wearable.  (My hips are a bit larger than this form, so this fits me a little closer in the tummy area than it shows here).

V1477 Print

The 2nd version is the one I really wanted; made from a poly knit purchased at Mulberry Silks during the retreat.  This is red and black with the red being glittery.  This fabric is a little thicker than the test fabric.  It is less clingy and just skims my body.  I like it very much and it washes like a dream.  With the glitter aspect, this is good for evening, but can also be worn during the day with a jacket or vest.

V1477 Red

A few tips:

  • Read the directions carefully for the twist.  It is a little confusing, but if you lay the front out as Sandra shows in the directions and follow her “twisting” method, you will get it right the first time.
  • Some sewists have commented that the twist accentuates the bust.  The more drapey fabric does do that, so I just wear a 3rd layer.  I have a brown faux leather vest that looks great with the print top.  The red/black top does not accentuate the bust because the fabric is not as thin.
  • Sandra made the longer version and sewed up the slits on the sides to turn it into a dress.  I don’t wear dresses often, but I think that would look good a bit shorter, with leggings.  The sides hang slightly differently and it looks very nice.